Planet wheel axle

The roller technology shell adopts the nodular casting, which further improves the rigidity and durability of the shell,

The transmission gears are all carburized and quenched to obtain high hardness and wear-resistant surface. After quenching and tempering, all the gears are grinded to reduce noise and improve the efficiency and service life of the whole equipment

P product series has 9-34 specifications and models, and the large planetary drive system has two and three stages

P-Series products adopt parametric design, which can be transformed according to customer regulations,

Select the involute gear and the large planetary transmission gear, reasonably arrange the internal and external gear combination, and separate the output power

Roller production is allowed to be used in the place of continuous working hours system, and in addition, it is allowed to operate in both positive and negative directions

The output shaft can not be subjected to large radial force and axial force

The rated speed of the input shaft is 1500 rpm. When the input output power exceeds 18.5 kwh, 960rpm 6-pole motor supporting facilities are proposed

The working parts of vertical installation are all horizontal parts. The larger horizontal inclination angle is generally lower than 15. When it is higher than 15 °, other measures shall be taken to ensure sufficient lubrication and avoid oil leakage